Hoefslag overkapping met rondgewalste omheining, dubbele draaipoort met twee vingerslot en windbreekgaas

Roofings and multitrainers


Liberty Equine Products has 6 different types of fencing for roofings and multitrainers:

Type BB:
This fence is build from treated pine posts 10x10x250 cm and lines of Beo – Band

Type R: 
This fence is build from treated pine posts 10x10x250 cm and treated pine rounded planks 4,5×9,5 cm or half round planks of ø12cm grinded.

Type P:
This fence is build from treated pine posts 10x10x250 cm and planks of 2,8×14,5 cm.

All fences have an outer turning gate. For type R and P an inner turning gate as well.

All fences have a height of 1.65 m.

 

Build-up of our fences:

BB2:       2 lines Beo band
BB3:       3 lines Beo band
BB4:       4 lines Beo band

R2:         2 rounded or half round planks
R3:         3 rounded or half round planks
R4:         4 rounded or half round planks

P4:         4 planks
P7:         7 planks
P9:         9 planks

As an option you can choose for a ground plank.

Round shaped fence

The round shaped fence is made of galvanised steel frames with vertical plastic planks 32mm or treated pine planks 28mm thickness. Both planks have a tongue and groove system and a standard height of 1.26 m from ground level. The inner and outer fence is equipped with a turning gate.

Optional

·    1 or more galvanised tubes Ø48mm above the fence.

·    A double turning gate instead of a single turning gate.

 

 

The system fences are special developed for the roofings of Liberty Equine Products

System Liberty 1

The beams of the structure are featured with sliding strips, wherein the outside planks can be slided in.

The outer fence is equipped with a turning gate.  Also there can be chosen for a sliding gate. This gate comes with a galvanised frame with planks.

System 1 is an outer fence which is build-up out of planks. It is closed till a height of 1.20 m from ground level, above that an open space of 35 cm with another plank. The total height is approximately 1.70 m from ground level.

For the inside fence you can choose out of type BB,R or P

System  Liberty 2

This fence is  equal build-up as system 1. The difference is the execution of the outside fence.

This fence is build-up out of planks with a total height of 2.25 m from ground level. The front is featured with a see true over a length of 20 m ( 5 sections). These sections are build-up out of  planks with a total height of 1.20 m, above that each section is equipped with a galvanised grid frame. The outer fence  is equipped with a sliding gate.

For the inside fence you can choose out of type BB,R or P